General Purpose motors with aluminum frame are suitable for a wide range of standard drive tasks in the industrial environment. As a result of their especially low weight, they are predestined for pump, fan and compressor applications. However, they are also admirably suited for conveyor technology and lifting equipment.
The 1LE1 series offers especially user-friendly terminal boxes. The 2 and 4-pole motors, shaft heights 80 and 90 go even one step further: For these motors, the terminal box is only fixed using one screw, and it can be continually rotated through 360 degrees. In addition, the terminal box is preconfigured with a terminal board. This makes it significantly simpler and faster to install motors in restricted spaces, as the motor connecting cable can be routed to the motor from any direction.
The line motors in the efficiency class IE4 are available as catalog spectrum
The Eagle Line is available for export to NAFTA. The motors are supplied with the electrical values in compliance with EISA stamped on the rating plate. The VSD10 line and VSD4000 line are optimized for frequency converter operation and are not subject to minimum requirements in the EU and North America. In combination with the SINAMICS G120 series the frequency converter duty motors are prepared for future system efficiency standards in Europe.
Increased power motors can be the solution if the motor must be extremely compact e.g. there is not sufficient space available for a standard motor. With these motors, in efficiency classes IE2 and IE3, power ratings of a standard motor can be realized in the next smaller shaft height.